Shrike Exploder
SHRIKE is a fully approved hard wire exploder which is currently in service with more than 44 countries worldwide. From the arctic to the tropics it has proven itself as a safe, reliable and cost effective system for the initiation of explosives, mines, pyrotechnics and other electro-explosive devices (EED). Two versions of SHRIKE are available - SHRIKE MKV is for use with standard NATO detonators and SHRIKE MKIV for the latest VA safety detonators which require a higher energy firing output. The energy output is up to 48J. There are also system accessories available, including Shock Tube Adaptors, Battery Chargers and Test Meters.
| Shrike
Mk IV -General
Specifications
|
Shrike
Mk V -General
Specifications |
- Size:
140mm x 95mm x 45mm
- Weight
420 g
- PRIME
time less than 8 seconds
- Arms
150uF capacitor to 800V
- Output
inhibited for resistances above 350 Ohms
- 4
independent output circuits
- TEST
LED flashes between 85 and 350 Ohms to indicate use of Group 1
detonators only.
- Output
inhibited for Voltages less than 719 Volts.
- Proven
operation in all climatic environments
The SHRIKE Mk IV Exploder is the chosen exploder when operating with Insensitive Group II Detonators |
- Size:
140mm x 95mm x 45mm
- Weight
420 g
- PRIME
typically 2 seconds
- Arms
capacitor to 400V
- Output
inhibited for resistances above 400 Ohms
- 4
independent output circuits
- Suitable
for Group 1 detonators.
- Output
inhibited for Voltages less than 319 Volts.
- Proven
operation in all climatic environments.
|
| NSN(s) |
| Shrike
MK V L3A3 Body |
1375-99-895-7682 |
| Shrike
MK V L3A3 c/w Ni-Cad Battery Pack |
1375-99-105-5626 |
| Shrike
MK V L3A3 c/w Battery, Mil Case and
FLT's |
1375-99-720-7364 |
| Shrike
MK V Case L1A3 (Mil) Ni-Cad
Batt and FLT's |
1375-99-587-8527 |
| Shrike MK IV
Body |
1375-99-865-4177 |
| Shrike MK IV
c/w H/D Ni-Cad Batt and Comm Case |
1375-99-011-2791 |
Contact
Deltic
for complete list of NSN's for related parts and accessories.
|